Speedo drive housing cracked :(

[brianthemagical 1]

So while I have car jacked up sorting some rust in the strut towers, I had a roll under the engine to check out the various oil leaks.

 

I found this;

A crack around the lower mounting bolt for the speedo drive housing. I don't know if that's the correct name, and a search didn't yeild and results.

 

So I need a new one.

Am I likely to find one on its own?

I really don't fancy having to buy an entire gearbox just to remove it. 

 

Not what I wanted to find. There's enough work to do on the car as it is.

 

I'll post a wanted ad shortly.

[SRDT 182]

Some have shims behind for the preload of the diff bearings and some don't.

If E = 10mm you can just use another one, if E = 8,65mm then you will need to check the preload.