Parcel Shelf Brackets 3d printed

[ALEX 98 1 Cars]

These are available on Thingiverse now.

My own creation copied the best I could from a single side and mirrored for the other.

https://www.thingiverse.com/thing:4386683/files

Not sure if they'll be strong enough in PLA, Maybe better in ABS?

Let me know if anyone uses one and how it goes as I dont have a GTI to test them.

 

205 Parcel Shelf Bracket Drivers Side 1.STL

205 Parcel Shelf Bracket Passangers Side 1.STL

[welshpug 1,657]

gti shelf is no different to base model

[ALEX 98 1 Cars]

Print these on the flat edge so the hook part is printed on the bed first, not as the above photo these were printed on the base with the handing written on it. These ended up been weak as the z axis lines are aligned with the part that is stressed.

See photo below using a resolution of 0.15mm using my CR10S. Print with supports everywhere.

 

 

Edited May 26, 2020 by ALEX

[ALEX 98 1 Cars]

https://www.ebay.co.uk/itm/Support-Range-Rear-Peugeot-205-Gti-Cti-Plastic-Solid/264617309114?hash=item3d9c6bb3ba:g:6fwAAOSwiX1eMwxt

 

Hmmm. I wonder if these are from my STL file I put on thingiverse?

I'd love to see the base of them LOL!