bacardincoke 42 1 Cars Posted May 18, 2020 Trying to identify the make of the locking bolt in the images below, may ring a bell with someone who has the same... no idea when they were put on the car, could be from new and therefore quite old - cheers. Share this post Link to post Share on other sites
Tom Fenton 1,561 Posted May 18, 2020 I think they are Peugeot bolts. I have the same on my 206 with a Peugeot branded case in the glovebox. 1 Share this post Link to post Share on other sites
welshpug 1,677 Posted May 18, 2020 I bought some like that from a motorfactor years ago for a 306 I'm sure, 205 has those horrible round pin types fair chance the same company made them for the dealers and they have been retrofitted. 1 Share this post Link to post Share on other sites
bacardincoke 42 1 Cars Posted May 19, 2020 The more I look at the security nut, the more I think it's been shortened by cutting the end off, surely that exposed hole isn't normal? Might have been done to make the standard brace fit over it, if it'd been longer may not have done. Would possibly suggest it's non-standard? Anyhow, the chrome caps are a pain to get off when on the car, presumably there's some sort of tool to do it that I don't have. It'd be sods law I get a puncture in the dark and wet when you least want to be fighting with them... may just go back to regular bolts! Cheers. Share this post Link to post Share on other sites
Tom Fenton 1,561 Posted May 19, 2020 Crikey you like to over think things. its exactly the same as the set I have except you are missing a yellow plastic tool to pull the covers off. One owner from new car and I’ve got the invoice for the locking bolts in the paperwork from the dealer. So they all had a hole in. Share this post Link to post Share on other sites
