engine ID

[Crescent205 11 1 Cars]

Hi Guys, I've bought a 1.9 project engine but it hasn't got the ID plate attached, is there a way of making sure its the 130bhp engine when i pull it apart? and not the lower bhp one out of the CTi?

Thanks in advance

[petert 588]

It's fairly obvious once the head is off:

 

D6B (130hp) - 41mm & 34.5mm valves, small chamber in head, large dish in piston, 0.445" cam lift

DFZ (105hp) - 39mm & 33mm valves, large chamber in head, small dish in piston, 0.405" cam lift

 

I'm sure I'll be corrected if those valve sizes aren't 100%