Twin Weber 40DCOEs

[Adamstanford 3]

Hi there. Done a thread on this last year and after a year of many, many miles I am convinced these carbs aren't for me. I'd like to do a swap.

My ECU is still present and I believe the wiring is there but would need to confirm this

This is a 1.6 late xu5ja car.

 

What I need.... 

Full fuel injection kit. 

Inlet mani, injectors, plastic pipework, mass air flow thingy, throttle body, fuel line and any ancillary hoses from the inlet mani. 

 

Fitted to my car, whilst removing the carbs from mine

 

What you get

Two very sweet, genuine Weber 40DCOES 

Trumpets and filters

Mangoletsi manifold

Choke cable

Accelerator cables, brackets

Fuel pressure regulator, all fuel lines from the filter to the carbs. The full kit.

 

This must be a good deal for someone, I just want to go to stock setup, bit less power, bit quieter.

 

Please let me know if you are interested.

Edited January 1, 2020 by Adamstanford
Needed to include engine size

[SootySport 23]

Might be better in the long run to fit aftermarket ECU for injection, such as Omex, DTA etc.

[Adamstanford 3]

On 1/6/2020 at 10:54 PM, SootySport said:

Might be better in the long run to fit aftermarket ECU for injection, such as Omex, DTA etc.

That's a world I've never ventured into. Baby steps! Need to find the injection setup first