306 hub carrier

[stumpyjag 6]

Hi all. Me again I’m afraid. 306 just failed mot for worn ball joint. Stripped it down and just as I feared same as happened on the drivers side the hole in the hub is oversize. However unlike last time I have managed to do the bolt up tight enough that it has pinched the ball joint shaft tight. In your option will this be ok as a long term fix or am I kidding myself and need to get another hub carrier. Thanks again. 

[Tom Fenton 1,541]

I’d be on the lookout for another. 306 stuff is still quite plentiful.

[jackherer 543]

306s can have either 16mm or 18mm ball joint holes so make sure you get the right one.

[stumpyjag 6]

Ok thanks all