What Size Is The Hub Nut?

[Guest ADRIAN]

I'm almost shure about it beeing 26mm...

not shure tho..

 

Can someone tell me?

Thanks ,

Adrian.

[Alan_M 66 1 Cars]

35mm i think.

[Guest ADRIAN]

35 is for the back drum nut I think...

[saveloy 8]

34mm for the 1.9 & 28 or 32mm I believe for the 1.6.

[jackherer 543]

I have seen 32, 34, 35 and 36mm on 205s.

 

seems to vary, but I recently had to buy a 35mm socket and it was listed specifically for peugeot/citroen hubnuts in the tool catalogue!

 

aftermarket driveshafts get whatever size nut they have to hand when they make them.

[pug_ham 244 3 Cars]

The hub nut on my 1.6's driveshafts are all 30mm at the front & 32 for the rear drums but all the 205 1.9 & 309 ones I've worked on have been 35mm on the front & also for the rear discs iirc.

 

Never found any with a hubnut smaller than 30mm either way.

 

Graham.

[jj205 4]

Yes my hub nuts are 35mm on my 1.9 gti, but today when i was fitting my new drivers side driveshaft, wellreconditioned from autofive, i found the nut supplied was smaller than 35 mm, ive only got a 30mm big socket and 35mm socket, so neither were useful, ive bought both sockets specially both of my 205s, 1.1 and 1.9

 

I think its something like 32mm this nut i got with my 1.9 driveshaft, but i just used the old nut 35mm as it looked new any tightened up okay, i think its time i got a big socket set,

 

Jonathan

Edited December 29, 2003 by jj205

[speedy indy 0]

its 35 on my 1.9....

[Hilgie 16 2 Cars]

35 on my 1.9 GTi as well.

 

 

The 1.6 GTi has 32.