Drive shaft tri lobal CV boot part number

[Telf 224 2 Cars]

Guys 

 

I'm tearing my hair out trying to get the correct CV boot for the driveshaft pictured. It needs to be tri lobal

. Does anybody know the part number please?!?

[dcc 855]

Is that me/ml or be?

[Telf 224 2 Cars]

Be? It's for a BE3 gearbox

[Tom Fenton 1,542]

Only ever come across one like that once. I think you’ll struggle to find the right boot. It might be easier to buy a complete shaft....

[welshpug 1,661]

indeed not seen one like that on a 205 before, they arent especially strong, the expert and boxer vans have them however with an ML box and a larger cup and shaft.

 

have you measured the effective diameter of the cup and the shaft?

[Rippthrough 98]

206's with the 1.4 have them, I managed to get a factor boot the right shape but only after about 10 attempts!

[Telf 224 2 Cars]

10 hours ago, welshpug said:

indeed not seen one like that on a 205 before, they arent especially strong

Can you quantify in what way they aren't strong Welsh? As far as I can recall this driveshaft has been fitted ever since I bought the car 8 odd years ago and has covered circa 60k. 

 

Thanks for the comments all. A boot has now finally been sourced

[Rcdunk 0]

Hi telf I am in the same position trying to find one of these spent my whole lunch break trying to find one with no luck all 3 of the local motorfactors supplied the wrong one even with the reg of the car all have asked for part number of boot which I have but with no luck either starting to stress now as it's the last job before it can go back on its wheels after a tidy up 

Edited October 7, 2019 by Rcdunk
Spelling

[Telf 224 2 Cars]

Hi.

 

I did get one in the end. Well actually my local garage did. The bloke is is a pal of mine. He might remember who supplied. I'll ask him

[Rcdunk 0]

1 minute ago, Telf said:

Hi.

 

I did get one in the end. Well actually my local garage did. The bloke is is a pal of mine. He might remember who supplied. I'll ask him

Thanks would be a great help 

[DamirGTI 342]

Three variations of them as it seems .. so one would need to do some measurement before order .

 

Availabe-made by :

 

GKN

SKF

Spidan

Febi

Sasic