Plumbing GTI6

[mmt 15]

Hi guys

 

What connects to the two smaller outlets on the waterhusing. And What connects to the two outlets on the steel pipe on the back of the engine? 

 

 

I guess one of the waterhousing outlets is connecting to the outlet on steel pipe. With a really small piece of hose. 

 

How do I connect the heater matrix and the Two remaining outlets. I also have an available outlet on the expansion tank:-)  

 

Thanks. 

 

[welshpug 1,657]

baker bm do a gti6 conversion hose set, not sure they do a LHD one but the two pipes on a gti6 engine are both for the heater matrix, the expansion tank will tee off into one.

[mmt 15]

I can’t quite make sense out of that. There must be RHD LHD differences. 

 

Any pictures anyone? 

[jackherer 543]

The BakerBM website says they do make a LHD kit - http://bakerbm.com/205.php?data=schkitgti6205

 

Quote

This kit has been designed for a Right Hand Drive 205 GTI. We can supply hoses for a Left Hand Drive set-up. Please email to discuss this option.

 

It looks a lot neater than RHD, there is no T piece!

[dobboy 231 2 Cars]

This might help you's discuss..... 8v cooling circuit.

 

I can remember putting a 22mm copper "T" in the pipe that comes out the bottom of the expansion tank, but i can't remember much more.

 

 

 

[Miles 331 1 Cars]

You only really need a T piece or 1 silicone hose from the expansion bottle to the metal water pipe, the rest can be std and the top hose a 406 2.1 TD works a treat, if going silicone you need to make sure you get the right lower hose to the chassis water pipe, there is only one size (Small) and not 2 but what do I know