Clutch recommendations

[blandy 29]

With my engine build underway and aiming for around 230bhp-ish 

 

what clutches are people using?

 

Car will be a track car only so no road use currently using a Valeo mi16 set up

[welshpug 1,661]

im using standard pull clutch, seems fine so far.

[16v205 9]

If your car is nasp, mine would be similar bhp. I was using a standard valeo mi16 clutch, it didn't slip. 

I'm only swapping it out for another standard mi16 clutch as a few fingers have collapsed. It must have been 12 years old though.

Edited January 4, 2018 by 16v205

[blandy 29]

Yes forgot to mention it’s n/a so will be sub 200lbft torque I would  expect 

 

welsh is there any benifit on push or pull? As I have the parts to run either 

Edited January 4, 2018 by blandy

[petert 588]

The standard valeo handles the torque fine, it just doesn't like high rpm downshifts. That's when the straps will self destruct.

[Miles 331 1 Cars]

I know Mike used a std for a while but like me is now on a Helix Paddle without any issues, mine's done around 6 season's now

[blandy 29]

Are you using the helix cover as well or just the pressure plate? 

[Miles 331 1 Cars]

Using the set