Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
welshpug

Sad Or Supplementary Air Device Testing

Recommended Posts

welshpug

Have seen quite a few threads asking about these and blaming them for allsorts of faults, I guess not many actually have Haynes manuals these days?

 

A very much maligned and over thought device, its a very simple rotary disc operated by a bimetallic spring, which has an electric heating element next to it, as well as being bolted to the side of the thermostat housing, there really isn't a lot to go wrong and they don't move fast and wear out like a more modern ICV/Idle control valve

The Jetronic system is very much clockwork and has no idle control built in, the SAD purely reduces the amount of supplementary air that bypasses the Throttle butterfly the longer the ignition is on and the warmer the engine gets.

 

So here's an extract from the Haynes manual.

 

37221035694_2fd8f3a47c_z.jpg

 

24079313778_5913c9c5b8_z.jpg

 

as you can see, very simple!

 

 

here's the schematic -

 

37899506952_fa5eb302d4_z.jpg

 

As you can see, its earthed through the starter solenoid, the very same wire that causes that oh so common 'click' and no chooch from the starter motor when you turn the key, so if that's causing voltage drop issues to the starter, it will also cause a high resistance on the earth side for the SAD so it'll take longer to close.

Edited by welshpug

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×