Which Cambelt

[mmt 15]

Hi guys

Which cambelt is used on a 2.0 iron block mi16 with a 1.9 mi16 head on?

 

I am about to put it back together do not know which belt to use as the old belt is gone!

 

Thanks

[Anthony 1,003]

You need the 2.0 Mi16/S16 cambelt (134 tooth) and tensioner setup.

[mmt 15]

Great. Thanks a lot Anthony.

I Think the old belt was a 136 tooth and it seemed a bit too long.

Thanks again.

[welshpug 1,657]

136 would have been a gti6 belt.

[mmt 15]

Ok. Thanks. The guy I bought it from Said he thought it was from a 405 diesel.

 

Just bought the 134 tooth belt. Waiting to get the block back from honing and the head back from valveguide renewal.

[welshpug 1,657]

ah, yes those are 136 tooth as well, but a different tooth profile

[mmt 15]

Ok. Thanks.

 

Very impressed of your knowledge. :-)

[DrSarty 90 1 Cars]

There are no real differences between the 1.9 and 2.0 Mi heads other than an oil hole and an exhaust stud. Perhaps 1 more difference, but it's nothing significant. PeterT's website shows this nicely.

 

So as Anthony said, you need your 2.0 Mi cambelt as it's basically no different to factory.

Edited October 28, 2017 by DrSarty

[mmt 15]

Ok. Thanks. It's been years since I've last been to Mr. T's page.