Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
mmt

Best Gear Oil

Recommended Posts

mmt

Hi guys,

What is considered to be the Best gear Oil with a plate diff installed? Race only.

 

Which Oil do you guys use ?

Share this post


Link to post
Share on other sites
welshpug

standard synchro gearset and you need to use normal 75w80, you can add some redline friction modifier to quieten the plates down, ensure it is not EP type oil.

 

Total have supplied the BV oils to PSA for years, it has been changed recently to a straight 75w formula which is backwards compatible with all BE and MA boxes.

 

if its a dog gearset then go with whatever the diff manufacturer recommends, this tends to be very incompatible with peugeot synchros.

Share this post


Link to post
Share on other sites
mmt

Thanks. Not too worried about plate noise:-)

 

Would a Castrol Syntrans V FE 75W-80 be suitable?

 

http://www.opieoils.co.uk/p-92422-castrol-syntrans-v-fe-75w-80-manual-transmission-fluid.aspx

 

Or Would a Castrol Axle Z Limited Slip 90 be better?

 

https://m.ebay.co.uk/itm/Castrol-Axle-Z-Limited-Slip-90-was-Hypoy-LS90-1-LITRE-1L-/161174862032

 

Or????

Share this post


Link to post
Share on other sites
welshpug

go to your local motorfactor or dealer, get 75w80, will be far cheaper.

Share this post


Link to post
Share on other sites
petert

I've been using Penrite Pro Gear 75W-90 for a while now. It already has some friction modifier built in and seems to play nice with the synchros. I found that Castrol Syntrax was definitely not compatible with BE1/BE3 synchros.

Share this post


Link to post
Share on other sites
mmt

Any Castrol reccommedations?

Share this post


Link to post
Share on other sites
wicked

The syntrax is full synthetic; afaik you should avoid full synthetic.

Share this post


Link to post
Share on other sites
welshpug

if they do a standard 75w80 then yes...

Share this post


Link to post
Share on other sites
welshpug

The syntrax is full synthetic; afaik you should avoid full synthetic.

you may be right with that, the comma 75w80 i picked up yesterday for a be4 box in a 407 is mineral to gl4 spec.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×