Best Place To Buy Wiring Loom Connectors, Tps/injectors

[floodys 4 1 Cars]

Will be making a loom soon for omex-jenvey and have spoken to a few people and I think It's best to get new connector ends to plug into the injectors, TPS, CPS etc. Where is the best place to get these from? Had a brief look on eBay, the web but couldn't find to much or do people just solder on "old" 205 loom parts? Cheers

[jackherer 543]

Polevolt, Simtek, autoelectricsupplies, 12voltplanet, carbuildersolutions are all good for generic connectors.

 

Some of the Peugeot terminals are only available from Peugeot dealers, the part numbers were here - http://www.ryanmoore.comule.com/ - but it seems he hasn't paid his hosting bill, does anyone have a copy?

[floodys 4 1 Cars]

Cheers mate I'll take a look

[Ryan 99]

I didn't know my website was down. It's free hosting and they've never sent me any messages about it changing.

 

I'll get it back up...

 

Edit: Should be working again now.

Edited July 7, 2017 by Ryan

[welshpug 1,657]

for keyed colour specific connectors I would raid a breakers for the housings, the terminals are pretty standard JPT type, there are a few blue and green used on late 90's and early 2000's PSA vehicles that would be compatible with the coolant senders, coilpack plugs etc are common black or brown 4 pin.

 

Injectors will accept the standard black housings, and the TPS are specific to the sensor types and easily found on ebay.

 

use as little of the 205's engine bay wiring as possible as its all pretty old and tired now.

[GLPoomobile 958]

Also add Vehicle Wiring Products as a potential supplier.

[jackherer 543]

Also add Vehicle Wiring Products as a potential supplier.

Indeed, I knew there was someone I'd forgotten, I've probably used them the most too!