Electric Window Regulator

[katmav 0]

Hi, does anyone recognise this drivers side electric window regulator? Looking for a fix as the cable has snapped, motor still works fine. Doesn't look like any of the ones I have seen up for sale...car is a 1.6GTi J reg.

[pugdamo 111 2 Cars]

That's an aftermarket set up, not sure how you would go about finding a replacement though, I'd try getting a standard electric reg and fitting that, may have to modify the wiring depending on what's already been done though .

[Tom Fenton 1,542]

The motor and drive cables are aftermarket, the mechanism is standard windy window with a bit cut off and the cable drive thing attached!

As said it's some kind of aftermarket conversion kit that uses an electric motor to turn a windy handle spindle!

Easiest way is a proper 205 electric mech which will bolt straight into your door. Wiring is 2 wires the worst you can do is get them the wrong way round so it works backwards and have to swap them over.

[Slo 283 1 Cars]

I've just bought one of those kits

 

http://www.ebay.co.uk/itm/Universal-2-Door-Power-Window-Kit-Electric-Roll-Up-Conversion-w-2-Swithches-Car-/322465796345?hash=item4b147590f9:g:RvcAAOSw4A5Y2jo7

 

Doddle to fit too

[steve@cornwall 100]

That's an aftermarket set up, not sure how you would go about finding a replacement though, I'd try getting a standard electric reg and fitting that, may have to modify the wiring depending on what's already been done though .

I believe I have a pair of those! Have thought about using them on CTI dear windows but don't think it's worth the hassle. I had them fitted in a previous CTI ( at the front) and are not hard to fit

[katmav 0]

Thanks all, that explains it!

[VDU 0]

Hi Matt, I have just removed one of these. I will need to test it still works but you are welcome to have it for the price of postage.

 

Andy

[Slo 283 1 Cars]

Have thought about using them on CTI dear windows but don't think it's worth the hassle.

 

That's exactly what I have bought them for, only problem is deciding how to mount switches and where considering the rear passengers will also need a switch too.

The switches that come with them are horendously cheap looking

[steve@cornwall 100]

Mount them in pairs in front and behind handbrake? I was thinking a pair of single switches in the rear and a single switch in front to lower all 4 windows with one touch.