dexter1002 4 1 Cars Posted March 20, 2017 (edited) I've recently purchased a roll centre cage for a 205 2nd hand but with all foot plates ect, My question is, does the bar for the front leg run through the dash and the box have to be welded next the the throttle of the sill, most the the cages I've seen seem to mount on the sill but this one doesn't seem like it will go anywhere else due to how the rear half sits in the back. The feet for the rear half or bent to the contours of the floor so can only be mounted it what looks like 1 place. I just thought it seems too far forward due to other and runs through the dash instead of onto the sill. Thanks, Dexter Edited March 20, 2017 by dexter1002 Share this post Link to post Share on other sites
205wrc 16 Posted April 4, 2017 Can you take a photo please? Share this post Link to post Share on other sites
mikeyd 13 Posted April 5, 2017 got a rollcentre cage fitted-- does not go through the dash- rear stays bolt through boot floor -can take measurements later if any help Share this post Link to post Share on other sites
dexter1002 4 1 Cars Posted April 5, 2017 Yeah that would be great if you could and also would you be able to take any photos of the position? Thanks, Dexter Share this post Link to post Share on other sites
