Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Phil205

Clutch Cable

Recommended Posts

Phil205

Hi, my clutch cable just snapped.

 

Where can I buy a new one ?

 

Do dealers stock them?

 

XU5JA Engine.

 

 

Share this post


Link to post
Share on other sites
toolie72

Motor factors

 

Dealers now sell "first line" brand as they've run out (certainly of be1) so you're not going to get Peugeot anyway

If there's a motor factor you trust-just use them

 

Ps when you're in a hurry-no buggers got one!!!

Share this post


Link to post
Share on other sites
welshpug

your local Motorfactor would still be able to get you one, you will have a BE1 box and a Clevis pin attachment on the pedal end if your car is unmodified.

Share this post


Link to post
Share on other sites
Phil205

here you go, looks like one of these.

 

http://www.ebay.co.uk/itm/PEUGEOT-205-1-9-GTi-1987-90-NEW-UNIPART-CLUTCH-CABLE-/282070733827

 

I believe that will do the trick, take yours off and compare it.

 

Many thanks.

 

I believe my car has a BE3 gearbox. Could that be right ? Reverse is top left.

 

Would it be this part for the BE3 gearbox :-

 

http://www.ebay.co.uk/itm/Peugeot-205-GTi-1-6-amp-1-9-Gti6-Mi16-BE-3-Clutch-Cable-Phase-1-5-amp-2-/282059190674?ssPageName=STRK:MESE:IT

 

Are they easy enough to fit yourself or is it best for a garage to do ?

 

I have adjusted mine before, so know where it fits to.

Edited by Phil205

Share this post


Link to post
Share on other sites
welshpug

depends on the pedal and pedal box.

 

that's quite expensive!!

 

its not hard, just a bit fiddly.

Share this post


Link to post
Share on other sites
farmer

BE3 cables are still stocked at Peugeot

Share this post


Link to post
Share on other sites
Phil205

BE3 cables are still stocked at Peugeot

Thankyou.

Share this post


Link to post
Share on other sites
jackherer

I believe my car has a BE3 gearbox. Could that be right ? Reverse is top left.

If reverse is top left by first with a lift up collar you have a BE1 gearbox.

Share this post


Link to post
Share on other sites
Phil205

If reverse is top left by first with a lift up collar you have a BE1 gearbox.

Thankyou.

I had thought it was a BE3 gearbox, but it sounds like it is a BE1.

I am sure you guys know what you are talking about.

Hopefully I should be able to get this sorted now.

Many thanks for all the responses. It really is appreciated.

  • Like 1

Share this post


Link to post
Share on other sites
Alan77

BE1 cables are pretty cheap on eBay, I think there's a motaquip one on there for a fiver at the moment. (New old stock)

Don't forget about the pin that rests in the lever arm...

Share this post


Link to post
Share on other sites
tartanbloke

Also, there is usually a reason for the cable snapping and you may find that your clutch requires replacing.

Share this post


Link to post
Share on other sites
Phil205

The garage had to order in 3 different cables to get the right one.

In the end, they said it was First Line Part No. FKC1103 that was needed.

https://www.aceparts.co.uk/113210-first-line-clutch-cable

 

Strangely enough - Amazon says it is the wrong part for my car !

https://www.amazon.co.uk/First-Line-FKC1103-Clutch-Cable/dp/B00GSQVPHW

 

Many thanks for everyone's help.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×