Flywheel Bolts Part #

[Bobbafett 49 2 Cars]

Anyone know the part number for the flywheel securing bolts from Pug? Can't seem to track them down on Servicebox. (They have them listed for XU with Be3 but with some adaptor plates fitted so length might be different).

 

Spoox has them for £24! but I can't imagine they'd be anywhere near that from Peugeot.

[welshpug 1,661]

0537 13.

 

listed with the flywheel.

[welshpug 1,661]

they are fairly expensive at £2.26, not sure exactly why, I have used the Turbo diesel bolts which are the same length and cost £1.07.

[Bobbafett 49 2 Cars]

Still works out cheaper than Spoox so that'll do nicely. I've fitted the existing ones with threadlock and torqued to 60nm but read on another forum they're stretch bolts so would rather fit new although i'm aware that most people re-use them. Cheers!

[welshpug 1,661]

I doubt they are stretch bolts, especially as they're a screw not a bolt from memory

 

it certainly is advisable to use new bolts but in my experience you will be ok of you use a torque wrench.

Edited November 27, 2016 by welshpug

[Bobbafett 49 2 Cars]

While i've got the box off I think i'll get new bolts and torque them up to the exact book figure (66nm). I'll sleep well then

[Bobbafett 49 2 Cars]

they are fairly expensive at £2.26, not sure exactly why, I have used the Turbo diesel bolts which are the same length and cost £1.07.

 

Got them this morning at 86p + VAT each.