Fuel Pump Pin Out On Fuse Board

[allye 530 3 Cars]

Tried a search and couldn't get a answer so hopefully this will help others!

 

I've got the van mostly converted to GTI wiring, I don't have a GTI loom for the rear of the car though so was wondering which plug/pin out on the fuse board supplies the fuel pump so I can just run a single wire to the tank rather than sourcing a rear loom?

 

Many thanks as usual.

Ali

[welshpug 1,657]

got a gti fusebox?

[allye 530 3 Cars]

Aren't they the same? It's the 93 van fuse board at present but I do have a GTI one spare.

[j_turnell 137 3 Cars]

Do you have a haynes manual? Pretty sure it explains all in there iirc.

[Anthony 1,003]

The fuse boards are different. Fuel pump pins are the top right most corner on the 2 pin plug, but on non-injection models the pins typically aren't on the fuse board unhelpfully.

[allye 530 3 Cars]

Just what I needed Anthony thanks.

 

No I don't have a Haynes manual, I've got no doors that need holding open.

[welshpug 1,657]

fuseboard will be different and wont have the circuit for the fuel pump fuse.

 

done the same conversion recently, L reg 1.1 carb to gti6, used the full gti loom and fuseboard.

Edited November 4, 2016 by welshpug