rikky 37 Posted October 30, 2016 (edited) Can anyone identify where these two bits of trim might have lived? I suspect around the mirror area but can't see anything on ServiceBox so if anyone can help that'd be great! (http://www.rikky.net/upload/bits.jpg if photo doesn't load) I'm putting everything back together on the door and want to get them either binned or fitted Edited October 30, 2016 by rikky Share this post Link to post Share on other sites
welshpug 1,657 Posted October 30, 2016 they fit on the edge of the window aperture in the door behind the mirror trim. Share this post Link to post Share on other sites
rikky 37 Posted October 30, 2016 I've looked there but can't fit it without it hitting a seal, whichever way I try and fit it, whether it be on the outside or inside of the door skin. Not got a photo have you? Share this post Link to post Share on other sites
steve@cornwall 100 Posted October 30, 2016 On the inside of the outer edge if I remember, so you can't see door colour etc when you glance at the mirror. If that makes sense. 1 Share this post Link to post Share on other sites
rikky 37 Posted October 30, 2016 Makes sense yeah.. just can't get it to clear the inner door seal or the door window slider seal! Share this post Link to post Share on other sites
Gaz205 50 Posted October 30, 2016 Take the panel covering the wing mirror screws off on the inside of the door. They will slide in easy then Share this post Link to post Share on other sites
