kachel 5 Posted October 26, 2016 Hi alle, is it possible that there are different front wings for the gti and cti? The connections on the a pilar's seem to be different on the front wing ik bough't. It doesn''t fit Share this post Link to post Share on other sites
welshpug 1,647 Posted October 26, 2016 what makes it not fit? there's no listing separate for a convertible 205, only 3 variants of non gti 3 of gti and one rallye, which relate to the presence and location of a side repeater. Share this post Link to post Share on other sites
Anthony 1,002 Posted October 26, 2016 Sure it's not shonky fit pattern parts? I've seen some that were a horrendous fit where it meets the bottom of the A pillar, which sounds similar to what you're describing. From memory they were a good inch out... Share this post Link to post Share on other sites
kachel 5 Posted October 26, 2016 The problem is indeed at the A pillar where the two connection points of the front wing should be inserted in the clips wich are mounted at the a-pillar. The connection points are way past the connection clips on the a pillar when the rest of the bolts of the front wing are corectly fitted Is that the same what you mean Anthony? Share this post Link to post Share on other sites
welshpug 1,647 Posted October 26, 2016 sounds like it just needs a bit of massaging to shape, fit the rear bolts and get the gap to the door right first, before fitting the rest of the bolts, due ot the curve its quite flexible when not bonded on. Share this post Link to post Share on other sites