IanH 1 1 Cars Posted October 25, 2016 Anyone know what the clip / fixing is that holds the centre of the gti front grille on? Its the clip above the Peugeot badge. There's just a hole of randomness in my grille and a corresponding random hole in the slam panel. I have no clues. Share this post Link to post Share on other sites
Simes 248 2 Cars Posted October 25, 2016 I've always used a nut and bolt, once it nay gave been a captive nut. Share this post Link to post Share on other sites
Anthony 1,003 Posted October 25, 2016 There's never been anything in that hole on any 205 that I've owned - the grill is normally only held in place by the two outer upper bolts and the three lower plastic pegs. Share this post Link to post Share on other sites
IanH 1 1 Cars Posted October 25, 2016 Yep, that's what I thought. Hmm, so why the holes?? Share this post Link to post Share on other sites
Ryan 99 Posted October 25, 2016 Maybe it was designed to have a clip and then Peugeot decided to save a penny per car by not fitting it? Share this post Link to post Share on other sites
Bobbafett 49 2 Cars Posted October 31, 2016 On both of my GTIs there is a self tapper through the grille into a spire nut in the centre. Share this post Link to post Share on other sites
Henry Yorke 269 3 Cars Posted November 1, 2016 Mine have a self tapper and a plastic inset which went in there 1 Share this post Link to post Share on other sites
Simes 248 2 Cars Posted November 2, 2016 Mine have a self tapper and a plastic inset which went in there Come to think of it mine did too. Share this post Link to post Share on other sites
