Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
flyfisher

Mi16 Won't Start

Recommended Posts

flyfisher

Sorry if this is in the wrong section I have a problem my mi16 1905 cc won't start today Was running fine yesterday. First thing I checked was fuel released both pipes from fuel rail and turned engine over no fuel from either pipe I then checked fuses all seemed fine I know there is a taco metric relay where would I fine that any other ideas how do I check relay thanks peter

Share this post


Link to post
Share on other sites
welshpug

mi16 doesn't use a tachymetric relay if it's on mi16 management, two standard 4 pin relays

Share this post


Link to post
Share on other sites
Anthony

Assuming that it's running Mi16 management, there's two relays likely behind the drivers side headlight - one is for the fuel pump, the other powers up the ECU etc.

 

Those two relays are horribly exposed on most 205 Mi16 conversions and a prime cause of non-starting issues like you're seeing. Also, check the wiring on the back of the relay holders - it's often very corroded and sometimes breaks off completely.

Share this post


Link to post
Share on other sites
flyfisher

Hi Anthony yes just gone out pulled of both relay plugs replaced them turned it over now have fuel connected up fuel hoses turned it over started first time problem solved a big thanks to you peter

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×