Tu24 Oil/water Heat Exchanger

[205Rallee 59]

I've got a small oil leak where the oil/water sandwich plate fits between the oil filter and the engine block. I'm guessing there is rubber o ring between the sandwich plate and the block as per the one on the oil filter?

 

Once the water pipes to the oil /water heat exchanger sandwich plate are removed is it just a case of turning it anti clockwise to remove it?

[welshpug 1,661]

you turn the hollow bolt under the filter that clamps the heat exchanger down.

[205Rallee 59]

Ah, just didn't want to turn it in case I knackered it or it had the opposite thread so it didn't loosen when you undo the oil filter. Has it got a seal behind it? Is there a similar thing on a 1.9Gti?

[farmer 328 1 Cars]

Yes listed on TU24 there is a seal

 

1104 20

01

SEAL

67,56X76,2X4,83

[RossD 44]

An oil filter seal in good condition is a good alternative to the Peugeot part referenced above.

Edited September 24, 2016 by RossD

[205Rallee 59]

Thanks everyone, I had a brand new oil filter seal so have used that, fingers crossed that will stop the leak.