Will This Fit? Master Cylinder

[NOsMAN 10 1 Cars]

"PAGID Brake Master Cylinder PEUGEOT 205 1.9 GTI 1.6 GTI

Brake System: ATE Diameter [mm]: 20,6 ; Length 1 [mm]: 32,4 ; Length 2 [mm]: 114,9"

 

Been trying to locate a suitable master cylinder for the car , the one taken off has the part no 311698.

Will the one above fit? tried 2 different ones already but the dont fit.

Any advise on where to get a suitable replacement?

[j_turnell 137 3 Cars]

I would say yes Chun. It's the right size 20.6mm and has 4 outlets assuming your running the 1.9 4 line setup. Bendix is the brand to get but last time I tried to get hold of one my local parts place couldn't get one.

[idoari 10]

I got a brand new Bendix mc and it was bosch mc inside the box. They apparently works together. You cannot go wrong with bosch anyway since a lot of the gti parts are bosch anyways : ecu,injectors,maf even the wiper motor.

 

Ido

[NOsMAN 10 1 Cars]

Thanks guys, the joys of 205 ownership lol , now replaced master cylinder , calipers, new discs and pad and the rear brake on the passanger side is still s*it. Only things left to change is brake pipes and compensator(if i can find any)

[NOsMAN 10 1 Cars]

BOSCH - Ref: 0 204 131 048

BOSCH - Ref: 0 204 131 049

 

Also trying to work out which one is the correct one as they have 2 available ??(searched old post and found mister auto online who sells them.)

[welshpug 1,658]

those are 1.9 brake compensators/limiter valves not master cylinders

oh, youre asking which is correct for a 205? wasnt clear as this thread was about MC's!

[welshpug 1,658]

http://forum.205gtidrivers.com/index.php?showtopic=121991

 

both are 'correct' differing peak pressures but not a significant variance if they're both listed for a 205, just make sure you fit them in pairs.

 

gsf used to do them at £28 but that was quite some time ago, the pair on my zx cost £110 5 years ago but they weren't as common.

[NOsMAN 10 1 Cars]

0 204 131 048

just spoke the parts women who has said only the above compensator will fit my car , after i gave her the chassis no, reg.

As for the M/C , I have put it on already and its perfect

[welshpug 1,658]

They'll both fit, just different specifications.

[NOsMAN 10 1 Cars]

oh lol wonder why she told me they didnt fit, maybe she wanted me to buy the expensive version.... cheap one is £36 and the 2nd is £69 .. damn she is a cheat ,luckily I didnt buy it from them.

[welshpug 1,658]

because computer doesn't list it