Ford Group A Studs - Peugeot Wheels

[calvinhorse 870]

My pug is running ford group A wheel studs (thread pitch 12x1.5) for winter I want to put standard peugeot alloys on, does anyone know of a flat seated nut in 12x1.5 that will work with a peugeot alloy?

[petert 585]

Grayston?

[welshpug 1,655]

conversion washers-

 

Look at this on eBay http://www.ebay.co.uk/itm/301895769845

 

direct fit toyota nuts, large closed head so might not work, not sure on shank diameter either

 

Look at this on eBay http://www.ebay.co.uk/itm/120934545503

 

or these for the later type pug alloys for the flat seat bolt which has a taper under the head for the steel spare wheel, you could drill your wheels out and press these in so they're not loose.

 

 

Look at this on eBay http://www.ebay.co.uk/itm/361509467645

[petert 585]

see here

[calvinhorse 870]

conversion washers-

 

Look at this on eBay http://www.ebay.co.uk/itm/301895769845

 

direct fit toyota nuts, large closed head so might not work, not sure on shank diameter either

 

Look at this on eBay http://www.ebay.co.uk/itm/120934545503

 

or these for the later type pug alloys for the flat seat bolt which has a taper under the head for the steel spare wheel, you could drill your wheels out and press these in so they're not loose.

 

 

Look at this on eBay http://www.ebay.co.uk/itm/361509467645

Cheers WP, I did look into doing it like this but it got very pricey buying ford - aftermarket nuts then the washers, those washers are cheap compared to most I've seen

PeterT I never knew they existed, that might just answer my question