Identifying Ht Lead And Tps Sensor Plug On Mi16 Engine

[dicky20014 4]

Hello,

 

I'm having a bit of trouble finding a HT lead that is around 2 inches longer than the one in the attached photo if anyone can help? I have been to all my local suppliers as well and none of them know.

 

Also, does anyone know where to get a plug that fits this TPS sensor? (or what it is off). I'm sick of the aweful wiring falling out of it all the time and would like to do the job properly if possible

 

Many thanks

 

Rich

[welshpug 1,657]

as they are keihin bodies its probably a bike tps from something like a gsxr750/1000, and therefore a proprietary Tyco or amp plug specific to that tps

[welshpug 1,657]

are the leads gm ze16/18 type or custom made?

[dicky20014 4]

Ah OK so probably not some moderately generic plug. That gives me a bit of a lead though. Hopefully someone else has a similar set up and will know what it's off. There just shop bought. I think they could be off a corsa but I could be totally wrong. I just need one a little longer for cylinder 4 then I can tidy it up. It's stretched right to its limit so I can't imagine it's doing it any good

[Ryan 99]

Looks like it might be some kind of EconoSeal connector. I can't quite tell from the pics.

[Liam 0]

​

 

Hello,

 

I'm having a bit of trouble finding a HT lead that is around 2 inches longer than the one in the attached photo if anyone can help? I have been to all my local suppliers as well and none of them know.

 

Also, does anyone know where to get a plug that fits this TPS sensor? (or what it is off). I'm sick of the aweful wiring falling out of it all the time and would like to do the job properly if possible

 

Many thanks

 

Rich

 

Hr Rich is you go to simtek uk they should have it listed on there it looks like a zzr 1400 tps plug