205 Cv Joints

[K20205 5]

Im after a set of driveshafts that will fit the 1.9gti hubs.

 

Which driveshafts and outer cv will fit the 1.9 hubs?

 

I heard 306 gti6, 406 hdi cv joints and shafts are same. Length doesnt matter for me because im only going to be using half the shaft from outer cv end, going to cut and weld them onto my k20 outer diff side.

 

Thanks

Edited July 13, 2016 by K20205

[welshpug 1,661]

any 306 with the 82mm wheel bearing will have a compatible cv joint.

 

406's all use the 82mm bearing and same spline, but a larger bodied cv joint which will foul a 205 hub unless turned down a but.

[K20205 5]

Okay thanks mate,

 

Ill just go with the 306gti druveshafts,

Seen a pair on ebay going for £35

 

They use 82mm bearings.