Be1 Box Best Place To Buy These ?

[Glos_pug 13 1 Cars]

Just wondering who stocks these parts. ?

PEUGEOT 205GTI BE1 RELEASE BEARING and does anyone do maybe an uprated version?

Peugeot BE1 Release Bearing guide?

 

Ours has literally eaten them.

 

[farmer 328 1 Cars]

Peugeot

 

Ebay

 

Valeo stockist

[welshpug 1,661]

i have heard of uprated items, might need a be3 clutch arm though, ask Colin Satchell.

[Glos_pug 13 1 Cars]

I cant seem to see any Guides that look like the one fitted to ours. Most just seem to be a triangle and dont follow the lines of the box like the above picture. Im guessing these are just patten parts but will do the job.

[Miles 331 1 Cars]

What clutch is it as most AP etc use a large bearing which needs some work to fit, Sleeve is a dealer item for around £25,00, you can get pattern but not something I would do there

[welshpug 1,661]

You've got an early item there, superseeded by the pressed steel type.

 

not sure if that earlier type is available but febi items are fine at £4 odd on trade.

[Glos_pug 13 1 Cars]

It has an AP 4 paddle fitted. The bearing has seized and fell apart.

 

From the bits I have and a quick search it looks to be a standard realease bearing set up.

Edited July 3, 2016 by Glos_pug

[Glos_pug 13 1 Cars]

Ahh looking in the cars Bible it should have an AP racing bearing. Which then some how fits to the plate.

Edited July 4, 2016 by Glos_pug

[Miles 331 1 Cars]

Was going to say all the AP one's I;ve seen run a spacer behind them

[Glos_pug 13 1 Cars]

 

Finally got some snaps sent over. Thats the trouble when not with the car.

AP racing carrier or some home brew knock up. ?

Either way its failed

Edited July 4, 2016 by Glos_pug

[Miles 331 1 Cars]

Never seen one like that with the std backing so it could have been modded knowing the history of your car, do AP have anything listed or still universal

[petert 588]

AB Motorsport use to modify the std plate to accept the AP bearing.

[Glos_pug 13 1 Cars]

Miles - more than likely. Ap dont sell a release set up but just the bearings on their own. They do one that will work with the alloy middle part.

[Glos_pug 13 1 Cars]

 

New Ap Bearing fitted. Bit of a mare sorting this but a standard one would last all of 5mins.