Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
estland

Cranking, But No Spark.

Recommended Posts

estland

Hello, while driving the engine simply cut out.

 

I've found out that the coil has power, but no power from coil.

 

So far I've replaced the crank position sensor. The fuel relay clicks and fuel pump has power.

 

It's also interesting to note that for some time now the rev counter needle had been sticking at random locations for a moment.

 

I think the coil or the ignition module has failed. Any ideas guys? :)

 

 

The engine is a 8v motronic M1.3

Share this post


Link to post
Share on other sites
toolie72

Not my engine system but I'd personally suspect module first

You have power to coil but it's not firing-if module controls the pulse from coil then that's what I'd go for

On my 89 plate theres the lead from distributor to module-I've inadvertently disconnected it a rake of times now doh!!

Share this post


Link to post
Share on other sites
estland

Thanks :) , as I've read there's no way testing it either. Only by replacing it with a working one?

Share this post


Link to post
Share on other sites
welshpug

check if injectors are firing, if they are then ecu is seeing crank signal and itll be the ignition amplifier most likely, especially if you have confirmed power to the coil

Share this post


Link to post
Share on other sites
estland

Problem solved :) Ignition amp was dead.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×