Goodridge Male Thread Size?

[u47sb2 27 2 Cars]

Needing to source a couple of male to male adaptors for goodridge hoses, but I'm working away so can't measure the thread size/type at the moment! Anyone able to tell me (before I end up phoning Goodridge tomorrow)

 

thanks, Steven

[welshpug 1,655]

depends what the hoses are on!

[u47sb2 27 2 Cars]

Sorry, forgot to say! It's 1.9 hose kit for my 205!

The old braided hoses are done (been on the car since 2004) but need male to male adaptor for the fronts to suit the old fittings on the end of the copper pipe

[welshpug 1,655]

pipe should have a male end?

 

 

the hose will have a female 10x1.0 fitting

Edited June 14, 2016 by welshpug

[u47sb2 27 2 Cars]

Nah, the pipe has a female end. Given the hoses that arrived I'd have thought a male end but when I removed the ancient hoses male end on the old braided hose into female on the pipe. God knows why!

[toolie72 67 1 Cars]

Non standard calipers then? Hose normally goes into caliper

Female at other end

Edited June 14, 2016 by toolie72

[u47sb2 27 2 Cars]

Hose does go in to caliper (the male end). Need male both ends! A right pest finding the right bits.

[Powers 13]

Calipers are M10x1.0 as well

[u47sb2 27 2 Cars]

Yep. The problem seems to lie with the fitting on the pipe being female rather than the usual male. M10x1 male to male adaptors ordered after a search. Thanks all.