Engine Label On Cylinder Head

[dynacord 6 1 Cars]

Hi,

 

I need to make a new engine label for the Mi16 in my trackday 205. The problem is, I lost the original 1.9 8v label and need to fabricate a new one.

 

While going through the cylinder heads in the garage, noticed that on the heads from 147bhp engine, the engine label is riveted in the middle, like this:

 

https://drive.google.com/file/d/0Bwodij5HTjuad0RjaHY5aFFNVHM/view?usp=sharing

 

but on mine head (from a D6C 158bhp engine), the label must have been on the left side, behind the engine mount:

 

https://drive.google.com/file/d/0Bwodij5HTjuaaVVNT2NkS3ZkN0E/view?usp=sharing

 

Can someone check on their engines where this label sits, please.

 

many thanks,

Alex

Edited March 23, 2016 by dynacord

[Miles 331 1 Cars]

Only the XU10J4 engine had the tag on the head, the XU9's on the block, J4 on the rear above the water housing (Good place not) and the 8v's on the front, But again early labels washed off, later ones stamped into the tag or the block

[dynacord 6 1 Cars]

thanks Miles!