Air Filter Pipework Advice Please

[Juttie205 123 2 Cars]

I have just started to find hime for all my coolant hoses,sad hoses and breather hoses and not sure if im missing a hose? the 90degree pipe from air filter to afm has a bit for a pipe underneath should this have a pipe or should it have a blank?

[Andrew C 1]

It should just be a blank...

[Juttie205 123 2 Cars]

ok thanks think i have a blank somewhere.

[speno 239 2 Cars]

I don't think that is correct

filter to afm has kind of an s shaped pipe ( 90 degree ish ) with no other pipes linked to it , the throttle body to afm a 90 degree pipe has two other outlets one goes to the oil filler the other to sad

or am i misreading which pipe you are talking about

[farmer 328 1 Cars]

The new AFM to air can pipe has an outlet on it for some reason

 

Peugeot advise the blank purchase on the notes

[Juttie205 123 2 Cars]

Im on about the other pipe mark all good found the blank that came with pipe so makes sense now which is good as I've now found homes for all pipes.

[speno 239 2 Cars]

Ahh cool didn't think you meant that one after reading it a few times

[backroadpug 12]

Hi sorry to hi jack ur thread. But in middle of re fitting my 1.6 now the mi engine is removed. And im also struggling with pipe work. Where does the pipe go from the underside of inlet manifold.any pics people have of the breather system would be handy. Thanks

[Anthony 1,003]

Underside of inlet manifold goes to the front side of the SAD. The rear side of the SAD goes to the induction hose between the AFM and throttle body.