Rear Hub/wheel Bearing Abs And Non-Abs

[brianthemagical 1]

Hello,

 

I'm looking to replace the rear wheel bearings on my non-ABS MK2 1.9 GTi.

 

GSF only list ABS rear wheel bearings. Will these fit a non-ABS car?

 

I know there are differences between other PSA ABS and non-ABS rear hub/stub axle set-ups.

 

Thanks

[farmer 328 1 Cars]

I would say different

 

I bought Firstline from my motorfactor

 

Also seen SKF on ebay

 

http://m.ebay.co.uk/itm/172087117712?_mwBanner=1

[Miles 331 1 Cars]

They are no ABS wheel bearings on a 205, When ABS was fitted it was only on the front, I know GSF had some ABS ones which where all 306 ones which of course don;t fit, Its like allot of factors ask the same on the front but again the bearings are the same on 205, 306, 406 etc. But with GSF if the bearings are Vtech avoid like the plague

[Paul_13 212 1 Cars]

Yep avoid the vetech. They lasted me no more than 2k miles with s*it loads of play

[dawning 11]

I think this is the right one. SNR is what you get it you get if you buy from peugeot or citroen but they charge about 50 quid.

 

http://www.ebay.co.uk/itm/SNR-Rear-Wheel-Bearing-for-Peugeot-309-306-205-106-Citroen-ZX-Xsara-Visa-Saxo-/251115829687?hash=item3a77ab79b7:m:mgjvYMl-gNymt6F4pulxmgg

[Anthony 1,002]

That's for drum braked models - the hub and bearing are one piece on disk braked rears as found on 1.9 GTi's.

[dawning 11]

Ah sorry missed the 1.9 bit.

[brianthemagical 1]

Thanks for all the help, and apologies for the delayed reply. I went for the SKF eBay jobbies on the end.

 

Thanks again.

[And 15 1 Cars]

I have ran 306 or 106/saxo ones for a long time even before I changed the rear arms for 306 ones, last time I did get a 205 one it was machined for the abs ring, what's meant to be different about them other than the price?