Front Bumper Fixing

[Gavin Waddell 18]

Has any one got a photo of how the front number fixes

To the wing( not service box). I've got all the parts not just sure of the order they fit.

 

Thanks Gavin

[bondo 6]

it's all here

 

http://forum.205gtidrivers.com/index.php?showtopic=67010

[Gavin Waddell 18]

Yeah I found that was well what I was wondering is if there is rubber buffer that fits in the large hole that the T bolt then goes through like on the back bumper?

 

Gavin

[bondo 6]

Seems to be (7427-16)

 

http://public.servicebox.peugeot.com/docpr/affiche.do?ref=205F774A10A&refaff=205F%207%2074A10A&idFct=FCT0101

Edited February 9, 2016 by bondo

[Gavin Waddell 18]

Dinthaveservice box so can't access it. But I'm correct in thinking there is a buffer in the hole and theT bolt runs through it. Could you do a screen capture of the service box page.

 

Gavin

[Tom Fenton 1,541]

Rear bumper uses a t-bolt through bumper through a steel cup and then a big rubber that fits the bodyshell tab.

 

Front non-GTI bumper is a similar arrangement

 

Front GTI bumper is different, short t-bolt attaches the pressed steel slider bracket to the bumper. Then there is the rubber which has the hexagon threaded spacer in it. Then a bolt pointing outwards through the corner bar into the threaded spacer joinsit all up.

[Gavin Waddell 18]

So no rubber buffer in the big hole next to the m8 hole the bumper bar ant rubber top hat all come together.

Tom any chance of a photos of how its on your lazer green resto?

 

Thanks Gavin

[Tom Fenton 1,541]

No. The large hole in the wing is not used.

 

And no I can't take a photo of my green car as its stored elsewhere for winter, and I haven't had the front bumper off it so no photos on my computer.

[Gavin Waddell 18]

Ok cool worries