1.9 8V Big End Torque Setting

[timoth123 37 1 Cars]

I know the haynes manual goes on to say 40nm, loosen, 20nm then 70 degrees.

But i dont have a dial gauge.

 

Ivd read on here in a search that 51nm will suffice. Anyone confirm or deny such a thing?

Edited December 11, 2015 by timoth123

[welshpug 1,661]

buy an angle tightening gauge!

[timoth123 37 1 Cars]

There is that option. But if that can be avoided by having a final torque setting ive saved a few quid and a journey to the tool supplier.

[dcc 855]

Paper, pen job done

[barneys66 123 1 Cars]

If you're passing Newmarket you can borrow mine.

[hoodygoodwood 71 3 Cars]

I thought it was the head bolts that use that sort of sequence , my Haynes manual says Big End cap bolts are 50 NM .

[kachel 5]

I did mine with 50nm like subscribed in the revision manual.

[timoth123 37 1 Cars]

Maybe I've got an old manual then. 50nm it is! Thanks guys!