205 2.0 Turbo Conversion

[gledhill 0]

Hi chaps I've done a few of these before in the past. I recently dusted the one I started 5 years ago off and decided to complete it a few weeks ago. The ecu I had I thought was unlocked but doe sent seem to turn on the double relay. I bought one from Spoox but with the same issue.

If I energise the coil it does put my fuel pump on etc .. Is there anyone close to Bradford to help??

Thanks

[pugdamo 111 2 Cars]

I had exactly the same problem with mine, I unlocked my Ecu by disconnecting the keypad immobiliser while the donor car was running, it was fine for the few weeks I used the car but by the time I finished the conversion it re armed itself again, I sent the ECU away to be unlocked properly and it was spot on.

 

Just noticed you'd bought another Ecu,if you have a look at this http://forum.205gtidrivers.com/index.php?showtopic=146346&view=&hl=&fromsearch=1 it may help, if you can get it running by earthing the ECU it has to be that.

Edited November 9, 2015 by pugdamo

[gledhill 0]

Hi thanks for the reply and the link to an old thread. All my wiring is how it should be.

If I earth out pin 10 on the relay should this then enable the engine to run or will the ecu be locked internally?

Thanks

[pugdamo 111 2 Cars]

It should run, that was the only way I could get mine to run until I got the Ecu unlocked.

[gledhill 0]

Cheers I'll give it a go to and let you know.

I've done a few before in the past plus I use to be a panel wirer so I'm sure my work is correct. I just would like confirmation!!

Thanks