Subframe Insetts

[gaz832 7 1 Cars]

Basically I have welded the floor and other areas on the car . Removed the subframe but the inserts in the engine bay fell to bits . Have m10 rivnuts to put back in will pulling them tight and small welds be strong enough to keep it secure .

[Tom Fenton 1,542]

No in my opinion. Rivnuts are OK for holding covers on and mounting bits and pieces but I would not want to rely on them for load bearing suspension.

 

You can still buy the proper replacement cage nuts from Peugeot, that is what I recommend you do.

[Biggles 65]

Agree - I wouldn't consider rivnuts for load bearing applications.

[gaz832 7 1 Cars]

You dont happen to have a part number for them do you .

[gaz832 7 1 Cars]

6941.81 - front subframe is that the part I need if so ill see if pug still have them