Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
johnboy1984

Caliper Slider Pin Question, Old Vs New

Recommended Posts

johnboy1984

Hi folks,

 

Finally decided to get the ball rolling on my 205 with the purchase of all new brakes for the front. While trawling eBay I found new slider pins with bolts and thought I'll have them. The originals I still have, on one of them the head is different, and one has a plastic sheath on the shaft... Here's some pics of old and new.. Can anyone shed some light on this please?

received_10153626737246665_zpso7ekrkjb.j

DSC_1366_zpstu4ebyqy.jpg

DSC_1365_zps9hnk69dm.jpg

Share this post


Link to post
Share on other sites
welshpug

They'll still work fine as long as the length and o.d is correct, its an anti rattle piece afaik

Share this post


Link to post
Share on other sites
johnboy1984

Thanks mate, just to paint my carriers then and crack on with fitting. I feel a bit uneasy about fitting all those new parts to old corroded hubs and arms but I'm going to do this as a rolling restoration, one little area at a time, to make sure it doesn't end up in the never gets finished category

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×