erbs 42 1 Cars Posted August 21, 2015 where do most peeps go for these? has to have the hole for indicator all opinions welcome Share this post Link to post Share on other sites
erbs 42 1 Cars Posted August 22, 2015 sorted now, thanks for your all your input 1 Share this post Link to post Share on other sites
rikky 37 Posted August 22, 2015 (edited) Got mine from CP4L with the bodykit holes for trim, but no indicator hole, but easy enough to make it / get the bodyshop to do it. No problems whatsoever Edited August 22, 2015 by rikky Share this post Link to post Share on other sites
erbs 42 1 Cars Posted August 22, 2015 phoned ecp today and they do gti wings with repeater holes so no faffing at the bodyshop Share this post Link to post Share on other sites
welshpug 1,647 Posted August 22, 2015 dont forget that there were two positions for the side repeater. Share this post Link to post Share on other sites
erbs 42 1 Cars Posted August 22, 2015 yes i am aware of this, earlier ones have a larger repeater hole, if they are smaller they can always be opened up more as my pug is a phase 1 Share this post Link to post Share on other sites
welshpug 1,647 Posted August 22, 2015 no, there's two positions of the same size hole. Share this post Link to post Share on other sites
erbs 42 1 Cars Posted August 22, 2015 ok show me,coz we not talking 50mm difference in positions here Share this post Link to post Share on other sites
Slo 283 1 Cars Posted August 22, 2015 arent the repeaters larger on phase 1.5/2? or is that just on the outside and both had the same size hole? Share this post Link to post Share on other sites
Anthony 1,002 Posted August 22, 2015 Same sized hole, just square vs rectangular lens and base. I'm on my phone so don't have a picture to hand, but compare the position of the side repeater on a Ph1.5 to a Ph2 and they're noticeably different as Mei says. Not such an issue if you're replacing both wings provided you're not wanting absolute originality, but it will stick out a mile if you only replace one wing with an incorrect age one. Share this post Link to post Share on other sites
Daviewonder 533 3 Cars Posted August 23, 2015 I thought they were the shame shape throughout. Here's the difference in position- ​ Share this post Link to post Share on other sites
erbs 42 1 Cars Posted August 23, 2015 well both wings are being replaced as drivers side wing has some rot at the bottom next to the sill. and has a dent above the wing line so far its having 2 new sills, a new bonnet and 2 new wings Share this post Link to post Share on other sites
Alan_M 66 1 Cars Posted August 23, 2015 Are they decent copies? Share this post Link to post Share on other sites
erbs 42 1 Cars Posted August 23, 2015 The sills seem ok and bonnet there is no noticeable difference, it does say on the sticker on the bonnet that it's galvanised so should last a long time and the wings I collect tomorrow so will update on Monday, will offer them up to see how much fettling they gonna need Share this post Link to post Share on other sites
erbs 42 1 Cars Posted August 24, 2015 Ok update as follows It turns out ecp don't do the gti wings as I discovered when looking at them, they are for base models only Well done to the fella who said last week that they were for a gti, when explained he said he never knew that. So ECP don't do gti wings So back to the drawing board, not sure where to look now ? Share this post Link to post Share on other sites
scbond 15 1 Cars Posted August 24, 2015 Try checking here...http://www.autopanels-castleford.co.uk/webpages/Peugeot/Peugeot%20205.htm The bottom two wings are the GTI ones, which one depends on the repeater position as pictured. Share this post Link to post Share on other sites
Rostle1984 2 1 Cars Posted September 5, 2015 ​ Ok update as followsIt turns out ecp don't do the gti wings as I discovered when looking at them, they are for base models onlyWell done to the fella who said last week that they were for a gti, when explained he said he never knew that.So ECP don't do gti wingsSo back to the drawing board, not sure where to look now ? I tried ECP for wings, Had both combinations and still no good, No trim holes and the lower edges were too large to even contemplate fitting the body trims too. In the end I got a local Independent to source me two wings with trim kit holes but no repeater holes and he also got me two bumpers with red trim fitted Share this post Link to post Share on other sites