td_w 2 Posted August 9, 2015 Hey there Sorry if this is in wrong section, please do move if it is, I couldn't find a better spot. I have some great new seats and harnesses (well not new, new but new to me) and I need to get them fitted as I am not good enough to do it myself. Does anyone have any recommendations in South Wales/Bristol or even London area of someone who can do this properly? Cheers Share this post Link to post Share on other sites
sp_en_ny 17 1 Cars Posted August 11, 2015 When I bought my CTI the rear seats had lap belts only. I took the car to a company called Quickfit safety belt specialists to convert the lap belts into a 3.1 belt. They have been in the game for donkeys years, were the cheapest I could find and the service was excellent. They had several other classic cars they were working on at the time. I could not fault them and would defo use again. Web address is www.quickfitsbs.com and are based in London. Although not sure if they would be of any use regarding the fitting of your seat. Share this post Link to post Share on other sites
td_w 2 Posted August 11, 2015 Thanks guys, they are Sparco Corsa seats, side mounting.... and I have some old Cobra's that are base mounting but adjustable..... its not even that hard to do, may end up doing it, but the belts worry me slightly! Share this post Link to post Share on other sites
welshpug 1,646 Posted August 11, 2015 belts are easy, they go to the harness bar on the cage. seats easy for a fabricator/welder. 1 Share this post Link to post Share on other sites
td_w 2 Posted August 11, 2015 Cheers welshpug The cage only has one cross bar on the back and its diagonal so don't think that will work? Would they be able to weld frame to runners to keep that function? The current Cobra seats are bottom mounted to runners..... Share this post Link to post Share on other sites
td_w 2 Posted August 11, 2015 belts are easy, they go to the harness bar on the cage. seats easy for a fabricator/welder. Cheers welshpug The cage only has one cross bar on the back and its diagonal so don't think that will work? Would they be able to weld frame to runners to keep that function? The current Cobra seats are bottom mounted to runners..... Share this post Link to post Share on other sites
Matt Holley 11 Posted August 12, 2015 belts are easy, they go to the harness bar on the cage. What all of them? Share this post Link to post Share on other sites
Matt Holley 11 Posted August 12, 2015 I had these welded in. you could get some universal seat runners from Merlins, mount them to the welded in rails and bolt the side mounts to that if you wanted although I just bolt the side mounts to the rails. Look for someone that does race car prep and they should be able to do it, I had my omp cage widened and a X bar added with harness bars but its all down to how much you have to spend. If I did it again I'd just buy a decent cage in the first place. Share this post Link to post Share on other sites
stufarri 98 3 Cars Posted August 19, 2015 When I bought my CTI the rear seats had lap belts only. I took the car to a company called Quickfit safety belt specialists to convert the lap belts into a 3.1 belt. They have been in the game for donkeys years, were the cheapest I could find and the service was excellent. They had several other classic cars they were working on at the time. I could not fault them and would defo use again. Web address is www.quickfitsbs.com and are based in London. Although not sure if they would be of any use regarding the fitting of your seat. I like the sound of this for my CTI. Any pictures of the work they completed and detail on price please? Thanks Share this post Link to post Share on other sites
sp_en_ny 17 1 Cars Posted August 19, 2015 (edited) From memory they originally quoted about £350, when I had it done it came to just under £300 as they completed the work quicker then what they had originally provisioned for so this was a nice added bonus. The work includes new seatbelts and you have a choice of about 20 colours as well. If you PM me your e-mail address I will take some pics and e-mail them to you. they are static belts and so do not wind away like the fronts. I have one each side and they put a lap belt in the middle for me, you can also have the middle one done but it means restricting your boot space as the belt has to run at a certain angle, could not get mine done as it has 2 12inch subs in there. Pretty sure you can do it yourself as long as you know where the mounting points are and what angle is required for the belt and of course the corrects bolts etc. Edited August 19, 2015 by sp_en_ny Share this post Link to post Share on other sites
welshpug 1,646 Posted August 19, 2015 where in London are you? I would highly recommend contacting Mike Edwards at Edwards motorsport in West Drayton, if he can't do it I'm sure he will know someone who could. https://www.facebook.com/Edwardsmotorsport37?fref=ts Share this post Link to post Share on other sites