Shorter Rad

[hatemgti 4]

Is that with a rotrex charger? Have you got any pics of the set up either way it sounds like a plan going forward

yes it's Rotrex,I will try to get a pic for you.

[allanallen 528 2 Cars]

Terrible picture but gives you an idea! Standard lowered rad with universal intercooler in front and one 11" ish puller fan. Cools fine on my supercharged mi16.

 

Edited July 25, 2015 by allanallen

[James_K 6 1 Cars]

Below shows how I did mine, it still needs a bit of tidying, but works well. I lowered the rad by about 120mm and fitted a 10" fan in front. I put a cosworth intercooler above the rad and the 2 oil coolers behind. If I did it again I would get smaller coolers and put them in the wings, but there's been no problems with temperature so far.

 

 

 

 

 

[blandy 29]

That's great thanks mine only gets used as a track car only so hopefully will be spot on.

[hudson 10]

Bbm shortened rad or Radtech same rad I believe ive /we've found a problem there is no blead at the very top so this potentially can allow a pocket of air above the top hose ive welded a boss and running bleed back to the header tank this will ensure all air is out looking at the top hose to the top of the rad could potentially be around an inch of air