Missing Cover / Inspection Plate

[JSF2004 0]

Hi All...After 5 years off the road, my 205 is almost ready to roll, photos to follow ....can anyone help me with the name or part code of this missing cover or inspection plate so I can source on eBay etc. It may have been missing for years but it was highlighted to me as being missing on a recent rolling road setup. Thanks in advance. James

[welshpug 1,661]

not without a location!

[iPlod999 143 1 Cars]

Gearbox?

[JSF2004 0]

Sorry ....seemed the photo didn't upload as planned !!

 

Here is it

[pug_ham 244 3 Cars]

It's just missing a plastic cover as in the picture below;

 

 

g

[JSF2004 0]

Thanks Graham

 

All clear on the part....what am i asking for / searching for to source this plastic cover?

 

cheers

[scbond 15 1 Cars]

JSF2004, your picture is pointing out the area just above the inspection cover shown in Graham's picture...in fact I think I can just about make the same plastic cover on your gearbox but it's a bit tricky to make out.

 

Not sure anything is missing from the area you've highlighted in your picture.

[JSF2004 0]

Thanks Simon

 

Here is a slightly better picture if it helps?

 

Cheers for helping out....

 

 

[Anthony 1,003]

Same plastic cover as per Pugham's picture above. It just loosely clips in from the outside so easy to fit/replace.

[JSF2004 0]

Cheers Anthony - what am i googling for to source one of these? Thanks

[pug_ham 244 3 Cars]

Cheers Anthony - what am i googling for to source one of these? Thanks

A visit to a scrapyard?

 

I might have one somewhere, I'll have a look at the weekend.

 

g