Upgrading My 309 Brakes - M/c Advice

[Loose Hand Luke 6]

Hi all,

Been having a search and a read of other theads without any precise luck with this question.

 

Are there any larger bore m/c's that DON'T fit a 205/309 servo?

 

I'm after a 22-24mm ish dia m/c and don't want to raid a scrappy and grab the wrong thing.

 

Was thinking something from a 306 might be easiest to find?

 

I'm wanting to run 306 xsi Lucus calipers on the front with my standard 309 gti rears.

Cheers all.

Luke

[allanallen 528 2 Cars]

You'll obviously know that you want a 406 non abs cylinder. 306 cylinders will work but the bigger ones are off cars with abs so will only have 2 ports.

[Loose Hand Luke 6]

Ah thanks mate.

Didn't find that info.

 

I'm not sure if my rear compensator valves are in the best condition so I might run a 2 port abs m/c and T-off the front and rears and fit a bias valve in the rear line.