macaroni 17 1 Cars Posted May 28, 2015 Hi, I recently fitted some C5 "steelies" to my 205 and they look great, refurbed in Anthracite. However, on track they totally over-heated the brakes! I am aware that is can be a problem with them and some people duct cold air to the brake rotors to compensate. My question is this; is it possible over-cool brakes? My track day pads need a little heat in them to be fully effective, so at the end of a long straight, will cooled brakes be too cool? When I replaced the front wheels with standard 1.9 alloys, the problem went away and the braking was great from then on. Incidentally, that swap also proved to me that Michelin Pilot Exalto 2s are a better track day tyre than Pilot Sport 3s. Cheers, Antony Share this post Link to post Share on other sites
SweetBadger 93 Posted May 28, 2015 (edited) I run vents in place of the fog lights and pipe cold air to the rotors - air ducting cable tied to the bottom arms and directed at the centre of the disc. I haven't had any issues with over-cooling, and that's with standard 1.9 discs and callipers, Ferodo DS 3000 pads and running standard 1.9 wheels. Edited May 28, 2015 by SweetBadger Share this post Link to post Share on other sites
omega 82 Posted May 28, 2015 when did discs become "rotors"? Share this post Link to post Share on other sites
welshpug 1,646 Posted May 29, 2015 when they are two piece Share this post Link to post Share on other sites
jackherer 543 Posted May 29, 2015 'Rotors' is American English, 'discs' is English English. Share this post Link to post Share on other sites
camgti 56 Posted June 3, 2015 We use rotors and discs in Oz. Im sure at a 'higher level' of motorsport there is an understood difference. Learn something everyday! Share this post Link to post Share on other sites