acox99 74 1 Cars Posted May 19, 2015 I have a front splitter that I have repaired using a professional plastic adhesive, I now need to prime, filler prime and paint it satin blacks, what products have you used, I know there many out there. paints not a issue as I've got that, usually if it's a new mirror cover or used a 1k acid etch in rattle can and not had a problem but being old scratched plastic it's a bit different. I've flatted and keyed it already so the prep is done. I don't know what plastic it is, it's not marked that's the only issue being 80's bmw. Share this post Link to post Share on other sites
mrfirepro 127 1 Cars Posted May 22, 2015 Alistair, I have used the U-pol plast plastic repair product, the filler primer I think is number 3. I did the group spoiler refurb with it and the end results were very good. If you wanted to try a patch first I think I have a little bit left Share this post Link to post Share on other sites
mrfirepro 127 1 Cars Posted May 22, 2015 this stuff Share this post Link to post Share on other sites
acox99 74 1 Cars Posted May 24, 2015 Thanks Paul. It's good to hear that product works. Il give it a shot. Share this post Link to post Share on other sites
