Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
ALEX

Inner Track Rods Discontinued?

Recommended Posts

ALEX

My local Parts supplier is usually really good, but the inner track rods he's ordered listed for the 205 are different to the originals.

 

The ones he's getting are the only ones listed under 205 and have a double raised lug on the locking washer NOT single as shown in this ebay advert.

 

http://www.ebay.co.uk/itm/Peugeot-205-Steering-Rack-Inner-Tie-Rod-OE-3812-25-QH-QR2119S-11628-/331456002454?pt=LH_DefaultDomain_3&hash=item4d2c513996

 

The problem is the washer doesn't sit flush to the rack with the extra lug. I have new Peugeot washers, but the design of the locking face is different (more flat instead of cone shaped) so I'm not confident in fitting them.

 

The parts supplier is adamant the design has been revised as the part numbers are correct but I'm thinking he's mixed up with the 206 ones.

 

 

 

 

Share this post


Link to post
Share on other sites
ALEX

Just found the ones he's supplying and they are also on ebay and look like this Listed for 205.

http://www.ebay.co.uk/itm/FAI-TIE-ROD-AXLE-JOINT-RC900246P-TO-FIT-PEUGEOT-205-1-4-83-96-OE-QUALITY-/360677810681?pt=LH_DefaultDomain_3&hash=item53fa12a1f9

 

Can anyone explain? Because I cant fit these tie rods to the rack with the double raised washer, unless I'm missing something??

Edited by ALEX

Share this post


Link to post
Share on other sites
Tom Fenton

Use the lock washer supplied with the new track rod.

Share this post


Link to post
Share on other sites
ALEX

It doesn't fit flush with the rack.

Share this post


Link to post
Share on other sites
welshpug

use the original washer.

Share this post


Link to post
Share on other sites
ALEX

The faces are different. more flat than cone shaped, obviously not designed to fit together, though probably would squash and fit, not sure about safety of it though,

Just selected my car in the second ebay advert and it says it doesn't fit my. 205 Cti 1988 1.6

I thought all 205 tie rods were the same?

Share this post


Link to post
Share on other sites
S@m

They are still available, i bought a Febi one last week and even the genuine ones are still available - 381795 - but are crazily priced and they are special order.

 

You have to remember that they are shared with the Citroen C15 van, and that was in production until 2004.

Share this post


Link to post
Share on other sites
Biggles

As an aside - are these common for PAS racks and non PAS racks ?

Share this post


Link to post
Share on other sites
ALEX

Ordered a set from the first ebay ad. see what I get.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×