Dimma Wheel Tightening Torques

[tyerz 1]

Hi guys hoping someone can help me out with some info, rebuilding a set of compomotive dimma splits and need to no the tightening torque of the bolts, only info I can find online is for 15 inch 20 bolt not 15 inch 30 bolt any help would be appreciated

[welshpug 1,666]

if its the same bolts then the torque will not be any different.

[dino20vt 3]

This is the reply I got from Compomotive years ago when I enquired about my 16 inch 30 hole wheels:

 

"The bolts will require a 8mm bi-hex socket for tightening and removal. Final

torque setting 12-14 ft-lb's. We also recommend the use of Locktite 243

thread lock and Dow Corning 794f neutral silicone upon final assembly."

 

HTH

[tyerz 1]

Thanks Dino that's a great help, and from what I have seen online ben the ratings on the 20 bolt are 26-28 ft-lb but it was also commented the reason they were so high was because they had less bolts.