Gti6 Conversion Fan Belt Parts.

[oldkiteman 6]

Just got my pulleys and belt for my conversion from andrew page.They are made by INA.The tensioner is 531025810,the idler 532012310 and the belt 6 row,1163 mm.the total cost was 45.86 plus vat.Rob.

PS.Just tried to refit PS pump and the gap where the pump fits is too big.Its 6 months since i took it off and cant remember if there was a bracket or 2 spacers taking up the slack.Does anyone know what goes in there?

[Clapton_Is_God 21 1 Cars]

I've just had a quick look at mine and there are two spacers and a top hat shaped spacer/sleeve.

 

I'm looking for these parts, who is Andrew Page?

[welshpug 1,666]

Iwho is Andrew Page?

 

 

a chain of motor factors

 

 

any motorfactor can get you the bits in.

[oldkiteman 6]

Thanks Steven.Must have lost the spacers,are they about 6-7mm thick?

[Clapton_Is_God 21 1 Cars]

Thanks Welshpug, I've not heard of them. I tried GSF with no luck and those prices seemed pretty good. I'll look them up.

[Clapton_Is_God 21 1 Cars]

No problem.

 

I've just measured them at 9mm each.

[oldkiteman 6]

Thanks for that.Ill solder some washers together to make them.Rob