1.9 Mi16 Aftermarket Manifold Gasket

[jackherer 543]

I'm fitting a four branch manifold to a 1.9 Mi16, it's the type with holes to match both 1.9 and 2.0 stud patterns. I don't have a gasket, springs or bolts for it and I have no idea who made it or where to get them from.This photo I've stolen from Ebay is the same type:

 

 

Does anybody know where I can get them? Or if the gasket ring is the same as anything else? (it's smaller than a GTI one)

[Tom Fenton 1,541]

Those gasket rings can be got hold of in loads of different sizes. If you measure the OD of where it fits I'm sure you'll be able to source one.

[Miles 331 1 Cars]

they vary from make to make, some are Derv Pug's others can be Volvo ones so I have been told, if you get stuck let me know as I'm at my exhaust place sometime next week so can pick the bolts up but would need to know the ID for the gasket

[jackherer 543]

Thanks for the replies, it's 60mm diameter.

[Simes 248 2 Cars]

I found these gaskets a right pain in the arse. I never managed to get the right one after several attempts over a few years.

 

Last time I visited my exhaust place they knocked up a new short section from manifold to centre box with a lambda boss and welded a new knuckle in place. No further issues.